The equalizer cable connect all hybrid battery blocks in parallel to ensure all blocks reach the exact same voltage. Voltage balancing is required if you are mixing new and old battery, fail to do so will result in accelerated degradation or error code. This is a must have tool for repair shop or DIYer.
Special features:
- Heavy duty rubber insulator
- Color coded alligator clamps
- Triple stranded wire design for consistent current flow distribution
Note: For NiMH pack, you need either 2 sets of equalizer cable, or use 1 set of equalizer cable but connect the other side of the battery terminals with copper busbar.
---------------------- SETUP GUIDE ---------------------
1. Always connect the black clamp to negative and red clamp to positive. Say the colors out loud during installation—this simple habit can help prevent critical mistakes.
2. If you're balancing a NexPower battery pack, it's essential to balance the special blade (the one with terminals on both ends).
- If the pack is still outside the car, connect a copper busbar to the far side of the special blade.
- If the pack is already installed in the battery cradle, simply plug in the service plug to complete the connection and balance the blade.
3. Wait at least one hour, then measure the voltage across all blades. If the readings are balanced, you're all set and ready to roll!